| |
|
| Features |
| |
| • 12
Mono inputs + 4 Stereo inputs (20 inputs total), all with
mic preamps and individual 48 Volt Phantom Power Switches |
| •
100mm faders on all inputs and Left, Right, and Mono
(center) Outputs. 60mm faders on the 4 subgroups |
| •
Four-band EQ on all inputs |
| • 18dB
per octave high pass filters on mono input channels. |
| •
Insert on all inputs, subgroups, aux outs and L, R & M
outputs. |
| • 6
Aux buses, selectable pre or post fader in pairs |
| •
Auxes 1 and 2 are configured as Level/Pan for stereo
operation |
| • XLR
L, R & Mono outputs switchable between Line and Mic
level. |
| •
Internal universal-voltage power supply |
| •
1/4" TRS and RCA connectors provided on Alt Output,
Monitor Output and Tape Input. |
| • Five
Year Crest Audio warranty. |
|
Specifications |
| |
| Frequency
Response: 20Hz-20kHz, +0/-1dB ref 1kHz (any input to any
output) |
| THD:
<0.01% THD (20Hz-20kHz @ +15 dBu out, any output) |
| Noise:
<-128dBu (mic in, 20Hz-20kHz 150 ohm source, 60dB gain) |
| Crosstalk |
| |
| Channel
Fader Attenuation: >90dB |
| Aux
Send Attenuation: >80dB |
|
| Phase
Shift: <+/-30 degrees, 20Hz-20kHz mic-in to main out |
| Mic-In:
XLR 4k ohm balanced, max voltage gain to main outs=98dB |
| Line-in
XLR and TRS: >10k ohms balanced |
| RCA tape
input: >10k ohms unbalanced |
| Bus
inputs: >10k ohms balanced |
| L/R/M
Outputs: XLR 100 ohms balanced (switchable between line or
mic level) |
| Group/direct
out: TRS 50 ohms ground compensated |
| Headphones
to drive >8 ohms |
| Dimensions
(H x W x D): 17.5" x 19" x 4.5" |
| Internal
Power Supply: 100-240 VAC, 50/60 Hz |
|
|